Gas Power Stroke



Features Vary by Year, Model, and Engine Size. Optimized Engine Tuning For Maximum Power & Performance. The Max Energy 2.0 Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy 2.0 also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options. The Most Powerful Tuning Available For Towing. Hypertechs Power Tuning is the only tuning on the market that allows you to use the highest power level for towing while maintaining safe EGTs. Hypertech develops and tests all Power Tuning under real-world conditions using maximum load and steep grades to ensure dependability. Tuning For Popular Air Intakes.

Cold air intakes change the air velocity and the volume of air passing over the Mass Air Flow (MAF) sensor due to the shape and size of the ducting around the MAF sensor and even the type of air filter used. Retuning the engine calibration for specific popular cold air intakes that are installed is necessary to correct the MAF readings and to take advantage of the increased airflow.

Hypertech offers an emissions certified version of the Max Energy 2.0 that is legal in all 50 states, including California. Only applications that have been emissions certified for sale in California are available in this version.

In addition, there is NO DIFFERENCE IN POWER, PERFORMANCE, OR FEATURE OPTIONS for the same vehicles offered in the non-certified version. If youve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy 2.0 allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicles computer calculates your vehicles speed based on the diameter of the stock tires. If youve installed taller or shorter tires, or changed the rear gear ratio, the vehicles computer doesnt know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Larger than stock tires often times will have a different tire pressure than smaller stock tires. Adjust the TPMS warning threshold when larger than stock tires are installed. Always obey all traffic laws when driving and only use this feature for off-highway competition in sanctioned events. These settings allow you to customize the shift firmness and quickness to how you want.

Adjust shift firmness for driving conditions from towing, daily driving, to maximum performance under full throttle acceleration. Tailors the transmissions upshift and downshift response time to fit your driving style and conditions.

Dial in your shifting towards economy, improved towing, or even increased performance. During normal driving the transmission algorithms allow the torque converter clutch (TCC) to slip rather than fully lockup.

This is done to dampen the engine vibrations, but can also cause other issues that degrade the performance and/or economy. By adjusting these algorithms, Hypertech allows you to customize the tuning exactly how you want. The Max Energy 2.0 allows you to raise or lower the shift points in 100 RPM increments for maximum performance, quicker acceleration, and better 1/4-mile times.

With the Max Energy Power Programmer, you have the ability to customize the shift points for every gear. Optimizing each shift point can definitely improve performance. Fuel Management Systems "V4/V8 mode". For improved fuel economy, vehicle manufacturers have developed V4/V8 modes.

Chrysler & Dodge vehicles use the Multi-Displacement System (MDS) and GM has the Active Fuel Management System (AFM). These systems allow the engine to turn into a fuel sipping 4-cylinder during light load conditions such as steady speed cruising. We perfected the engine efficiency in V4 mode for both regular and premium octane.

These systems have major benefits in fuel economy, but with a sacrifice in drivability when in V4 mode, and during the transition to V8 mode. The Max Energy allows you to adjust the minimum speed at which the V4 mode activates. Adjusting the minimum speed higher would prevent the V4 mode from activating while the road noise is low and V4 exhaust note is noticeable. Activating at a higher speed would allow for full benefit of the Max Energy 2.0 engine tuning in V4 and V8 mode at those higher speeds where the exhaust sound isnt as noticeable.

The V4/V8 mode can also be disabled completely as well. The "selectable throttle restriction" tunes the engine control systems for better low speed performance without sacrificing driveability, but it does not disable the torque management completely. There are many different torque management systems active at any given time while driving. During our tuning development we altered most of these systems in different combinations to assess the impact on performance, and driveability. We took the best combination of those changes and combined them with further tuning to improve the overall performance and driveability under all driving conditions. The overall affect was so dramatic we felt that all customers would benefit more if the changes were user selectable rather than forced. In todays vehicles, the onboard computer controls maximum engine rpm. The stock computer is programmed to shut down the engine when it reaches its redline. But if you have modified your vehicle to increase its high-speed performance, more rpm means more power.

When you shift gears with the stock rpm limit, the engine falls back to below the peak of its horsepower curve. When you extend the engines rpm range with the Max Energy 2.0 Power Programmer, your engine has more power available after gear changes. By adjusting the maximum rpm to keep the engine in the sweet spot of its power curve, you can increase the average horsepower that accelerates the vehicle.

The Max Energy 2.0 allows you to adjust the on/off temperatures of your vehicles electric cooling fans to match a lower temperature thermostat, such as a Hypertech PowerStat. A low-temperature thermostat produces a cooler, denser intake charge, is less likely to detonate under heavy loads and allows the engine to make more power. Read & Clear Diagnostic Trouble Codes(DTCs). If you get a check engine light or service needed message, the Max Energy 2.0 will allow you to read the code and gives you the ability to clear the code and turn the check engine light off. You can then make the necessary repairs to prevent the light from coming back on.

Return To Stock Or Change Option Settings. Hypertechs Max Energy 2.0 downloads and saves the stock tuning program, then uploads your customized Power Tuning program. Before taking your vehicle into a dealership for service, always return the vehicles computer back to the factory programming.

Once you have the vehicle back from the dealership, reinstall the Max Energy 2.0 Power Programming as before. The Max Energy 2.0 can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friends vehicle, simply return your vehicle to the stock tuning program and you may then use the programmer on another vehicle that is covered in the same part number. The Max Energy 2.0 Power Programmer comes with a USB cable and a CD containing software to enable quick updates over the internet.

If your vehicle has a new calibration not available when your Max Energy 2.0 Power Programmer was manufactured, it is possible that you will see a Cal not found message on the Max Energy 2.0 screen. If this occurs, you can simply update your Max Energy 2.0 with the correct new calibration via the internet. You can also get the update downloads using the CD which also contains an installation video and a printable version of the instruction manual. The item "HYPERTECH MAX ENERGY 2.0 TUNER 2005-2018 FORD CARS, TRUCKS, VANS, SUV's" is in sale since Tuesday, March 6, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Performance Chips".

The seller is "performancepartswarehouse" and is located in Torrance, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Grenada, Saint kitts and nevis, Saint lucia, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay.

  • Country/Region of Manufacture: United States
  • Interchange Part Number: 3.5 EcoBoost 4.6 5.0 5.4 v10 6.0 6.7 PowerStroke
  • Manufacturer Part Number: P03518 Gas Diesel
  • Other Part Number: 06 07 08 09 10 11 12 13 14 15 16 Chip Programmer
  • Brand: Hyper Tech
  • Fitment Type: Performance/Custom
  • Warranty: 1 Year